Skip to content
SearchFree account
Menu
Article

Tyre pressure warning light on: what does it mean and what do you do?

The horseshoe with an exclamation mark warns of low tyre pressure or a fault in the system. This is how you tell the difference and what to do.

Published on 15 November 20263 minute read

In short

  • If the light stays on, the pressure in one or more tyres is too low. Stop as soon as it is safe and look at the tyres.
  • If it flashes for about a minute after starting and then stays on, the system itself usually has a fault.
  • Measure and inflate with cold tyres, using the values on the label on your car.

Steady or flashing

Every new passenger car in the EU has had a system () since 1 November 2014. On many cars you can tell the difference like this:

  • The light stays on: one or more tyres have lost a lot of air. Stop the car as soon as it is safe, look at the tyres and bring them to the right pressure.
  • It first flashes for about a minute and then stays on: the system is not working properly. This repeats at every start as long as the fault is there. The light may then no longer warn you about a soft tyre.

How to inflate properly

  1. Measure when the tyres are cold: the car has been parked for three hours or driven less than 1.6 km. A warm tyre shows a higher pressure.
  2. Find the right pressure on the label on the door pillar, or in the owner's manual.
  3. Use a good tyre pressure gauge. You often cannot see it from the outside.
  4. Does the system need to be reset? On some cars you store the new pressure through the menu. Look in your owner's manual.

After changing wheels

New or different wheels can cause a fault. After changing, check whether the light goes off. Wheels from a shop do not always have a sensor. Snow chains or electronics in the car can also disturb the system.

What Car-Z does and does not see

The tyre pressure and the faults of this system are not in the standard data. Car-Z cannot read them at the moment. Use a tyre pressure gauge, or have it checked at a garage.

Frequently asked questions

The light stays on after inflating. What now?

Reset the system if your car asks for it (see the owner's manual). If it stays on, there may be a slow leak or a broken sensor. Have it checked.

Can Car-Z read my tyre pressure?

No. That data is not in the standard data.

Does every car have this system?

Every new passenger car sold in the EU since 1 November 2014 has one. Older cars may not.

Sources

  1. Controlesysteem lage bandenspanning (TPMS), instructieboekjeKia, consulted on 15 November 2026
  2. Controlelampje storing TPMS, instructieboekjeKia, consulted on 15 November 2026
  3. Bandenspanningslabel, instructieboekjeKia, consulted on 15 November 2026
  4. Bandenspanningscontrolesysteem (TPMS), instructieboekjeHyundai, consulted on 15 November 2026
  5. Tips voor een veilig voertuigRDW (Netherlands), consulted on 15 November 2026
  6. Regulation (EC) No 661/2009, Articles 9 and 13 (text as adopted)European Union (text on legislation.gov.uk), consulted on 15 November 2026
  7. FMVSS No. 138, Tire pressure monitoring systems (49 CFR 571.138)U.S. National Highway Traffic Safety Administration (text on Cornell LII), consulted on 15 November 2026

Read it yourself with Car-Z

Put a plug into the OBD port and see on your device what the car itself reports. Testing whether your plug and car work and reading the fault codes is free, without an account.

All articles