Does it work with my car?
Car-Z reads standard OBD2 through a small plug. Almost every petrol car since 2001 and diesel since 2004 (US: 1996) has it. Check your car below, or look up your make.
Check your car
Choose make, year and fuel. The answer appears right away.
Choose a make and a year to see the answer.
General guidance based on the law and known information per make; not a guarantee for one specific car. You also need a suitable plug and browser: see the guides.
All makes
55 makes, with what works, from which year and what to watch out for.
China
Czechia
France
Germany
Italy
Japan
Romania
South Korea
Spain
Sweden
United Kingdom
United States
What the answers mean
You can read live data and fault codes with a standard OBD2 plug.
It should work, but there is a caveat below.
Some things work and some don't. See below.
With a standard OBD2 plug the app cannot read this car.
How we decide
We start from the law: standard OBD has been required in Europe for petrol cars since 2001 and for diesel cars since 2004, and in the US since 1996 (diesel 1997). We then add what we know per make: security gateways, electric models and known exceptions. Each make page lists its sources and how sure we are.
Data last checked on 13 November 2026. This is general guidance, not a guarantee for one specific car. Found a mistake? Let us know via the guides.
What Car-Z reads
- Live data: speed, revs, temperatures, engine load, boost and more, as far as the car reports them.
- Stored and pending fault codes of the engine and emission-related systems.
- Clearing those codes, always only after you confirm.
- The vehicle identification number (VIN), if the car reports it.
- The 12-volt battery voltage.
What it doesn't do
- Fault codes from modules such as ABS, airbags or body electronics: those are manufacturer-specific.
- Coding, programming, adaptations or service resets.
- Battery health of electric cars and hybrids.
- Keys, immobiliser or odometer.
Ready to read your car?
Put a small plug in the port, open the app and connect.