Check the car before you buy
Two things a seller won't tell you: open recalls and codes that were just cleared.
Step 1 · at home, free
Check the licence plate
Open recalls are registered at the RDW. See them before you go and look at the car.
Choose your car
Looking up a licence plate only works for Dutch plates for now. Choose your make, year and fuel below.
Choose a make, year and fuel to see the answer.
Source: RDW Open Data. Our assessment follows from the rules and what we know per make; a real test with your car gives certainty.
Step 2 · at the car, with the plug
Read whether codes were cleared
If the car's self-tests are not finished, the codes were cleared recently. Car-Z shows that, with the distance driven since clearing.
Open the appHonest
Standard OBD2 shows engine and emissions only. No codes is no guarantee. A mileage read from the car says nothing about odometer fraud; check the service book and the mileage record. You make a shareable report for the seller with the inspection report.
How to check a used car in ten minutes
Ask first
Ask the seller whether you may read the car. It takes a minute and changes nothing in the car.
Plug in, ignition on
The OBD2 port is usually under the dashboard near the steering wheel. Open Car-Z and tap Connect.
Read codes and readiness
Look at stored codes, pending codes and the readiness monitors. Not complete? Ask why.
Test drive and report
Watch temperature and charging voltage on the road. Then share the inspection report with your garage or the seller.
Garage or used-car dealer?
Scan every car before you buy it in, with your mechanic's phone. With Garage you don't pay per report: reading, reports with your own logo and the file per car are included in the subscription.
What you get
Only what works today, plus what's honestly marked "coming soon".
Fault codes in plain language
Every code with a short explanation. A cheap sensor, or the catalytic converter?
Pending codes
Faults the car has seen but not yet confirmed. Clearing doesn't hide them for long.
Permanent codes
On cars that support them, they stay until the car itself confirms the repair.
Codes cleared recently?
Has the car finished its self-tests? If not, codes were probably cleared not long ago.
Freeze frame
The conditions when a fault happened: speed, temperature and load.
The inspection report, shareable
Codes, readiness, battery and freeze frames in one report. Share it by link.
Live on the test drive
Coolant and charging voltage on the move. A struggling cooling system or alternator stands out.
Testing your plug, the basic values and fault codes with a short explanation are free. Keeping your trips and history: Basic, €2.99 a month. Reading everything: Plus, €5.99 a month. Both fixed for the first 6 months, then cancellable every month.
What does it cost?
The inspection report is part of Plus: €5.99 a month, fixed for the first 6 months, then cancellable every month. Only checking one car? A one-off used-car check without a subscription is not available yet.
PricingFrequently asked questions
Can I tell whether the seller cleared codes?
Often, yes. Clearing resets the readiness monitors. If many monitors still say "not complete", codes were probably cleared recently or the battery was disconnected. It isn't proof, but it is a good reason to ask more.
Can I just plug something into someone else's car?
Always ask first. Reading changes nothing in the car. On someone else's car you only read; you never clear.
What's in the inspection report?
The fault codes with explanations, the readiness monitors, the battery voltage and the freeze frames of stored faults. You share the report by link.
Does it work on every make?
On almost every petrol car from 2001 and diesel from 2004 sold in Europe. Electric cars often share little over standard OBD2. Check the make.
Which plug do I need?
An ordinary, open OBD2 plug with Bluetooth LE that understands the standard ELM327 commands. Not a closed plug that only works with its maker's own app. Known brands such as Vgate, OBDLink and Veepeak are a safe choice. Older plugs with "classic" Bluetooth don't work in the browser.
Can I do it on my iPhone?
Yes. The iPhone app is coming soon; until then it works with the free Bluefy browser app. Safari doesn't let websites use Bluetooth. Practise once at home and it'll go smoothly at the seller's.
You might also like
Viewing a car soon?
Practise at home with the simulator, so you know exactly what to do when the car is in front of you.