Does Car-Z work with your Infiniti?
What works, from which year, where the port is and what to watch out for.
From which year
With an ordinary plug. Years are model years.
| Fuel | Europe (incl. UK) | United States |
|---|---|---|
| Petrol | From 2001 | From 1996 |
| Diesel | From 2010 | From 2010 |
| Hybrid or plug-in hybrid | From 2011 | From 2011 |
Check your Infiniti
Choose make, year and fuel. The answer appears right away.
Choose a make and a year to see the answer.
General guidance based on the law and known information per make; not a guarantee for one specific car. You also need a suitable plug and browser: see the guides.
What Car-Z reads
- Live data: speed, revs, temperatures, engine load, boost and more, as far as the car reports them.
- Stored and pending fault codes of the engine and emission-related systems.
- Clearing those codes, always only after you confirm.
- The vehicle identification number (VIN), if the car reports it.
- The 12-volt battery voltage.
What it doesn't do
- Fault codes from modules such as ABS, airbags or body electronics: those are manufacturer-specific.
- Coding, programming, adaptations or service resets.
- Battery health of electric cars and hybrids.
- Keys, immobiliser or odometer.
Where is the OBD2 port?
Look for a 16-pin, trapezoid-shaped socket. Usually:
Under the dashboard on the driver's side, near the pedals or the steering column.
In right-hand-drive cars (UK, Ireland) the port is usually on the driver's side too, but some models keep it on the left.
Security gateway
Nissan security gateway
from 2020 · Applies to: United StatesSince 2020, some North American Nissan and Infiniti models have a security gateway. Reading works; clearing codes with an ordinary plug hasn't been confirmed.
Electric and hybrid
Hybrids have a combustion engine and therefore full standard OBD. Engine data comes through while the engine runs; battery data is manufacturer-specific.
Protocols per period
Typical for this make; it can differ per model. A good ELM327 plug supports all OBD protocols and picks the right one itself.
- ISO 9141-2 (K-line)1996–2005 · standard OBD
- ISO 14230 KWP2000 (K-line)2000–2008 · standard OBD
- ISO 15765 CANsince 2005 · standard OBD
Good to know
- Infiniti shares most of its electronics with Nissan, so what applies there largely applies here too.
- Hybrids report engine data through standard OBD. Data on the hybrid battery (charge, cell voltages, health) is manufacturer-specific, and the app doesn't read it.
Tested in practice
What we and other drivers found with a real Infiniti. The rules above are a guideline; this is what actually happened.
No tests with a Infiniti yet
We haven't tested a Infiniti ourselves yet and fewer than 3 drivers have shared their results. Drive a Infiniti? Connect once and share anonymously whether it worked.
| Model and years | Status | What works | Dongle and protocol |
|---|---|---|---|
| All modelsfrom 2001 · Petrol · Europe (incl. UK) | ExpectedBased on the rules, not tested yet |
| – |
| All modelsfrom 2010 · Diesel · Europe (incl. UK) | ExpectedBased on the rules, not tested yet |
| – |
| All modelsfrom 2011 · Hybrid or plug-in hybrid · Europe (incl. UK) | ExpectedBased on the rules, not tested yet |
| – |
Verified: tested by us or a garage. Reported: at least 3 drivers shared the same result. Expected: follows from the rules, not tested yet.
Frequently asked questions
From which year does Car-Z work with a Infiniti?
With a standard OBD2 plug: petrol from 2001 in Europe, diesel from 2010 in Europe, petrol from 1996 in the US, diesel from 2010 in the US. Older cars usually lack standard OBD.
Where is the OBD2 port in a Infiniti?
Under the dashboard on the driver's side, near the pedals or the steering column.
Can I clear fault codes on my Infiniti?
Reading works. On newer models (from 2020) it hasn't been confirmed whether the security gateway allows clearing with an ordinary plug. On older models it works, always only after you confirm.
Does Car-Z work with an electric Infiniti?
As far as we know, Infiniti has no electric models. For hybrids, engine data comes through standard OBD.
Which plug do I need?
An ordinary, open OBD2 plug with Bluetooth LE that understands the standard ELM327 commands. Not a closed plug that only works with its maker's own app. The guides list which plugs we've tested and how to connect them.
Can Car-Z code or program my Infiniti?
No. Car-Z reads standard OBD: live data and engine fault codes. Coding, programming and service resets need manufacturer-specific tools.
Sources
- US EPA – OBD on 1996 and newer vehicles
- AutoSuccess – Nissan central gateway access
- Klavkarr – OBD port location Infiniti
How sure we are: Medium: based on reliable sources, with some details per model still uncertain.
Related makes
Ready to read your Infiniti?
Put a small plug in the port, open the app and connect.