Does Car-Z work with your RAM?
What works, from which year, where the port is and what to watch out for.
From which year
With an ordinary plug. Years are model years.
| Fuel | United States |
|---|---|
| Petrol | From 2010 |
| Diesel | From 2010 |
| Hybrid or plug-in hybrid | From 2019 |
RAM wasn't officially sold in Europe; imported cars follow the rules of the market they were built for.
Check your RAM
Choose make, year and fuel. The answer appears right away.
Choose a make and a year to see the answer.
General guidance based on the law and known information per make; not a guarantee for one specific car. You also need a suitable plug and browser: see the guides.
What Car-Z reads
- Live data: speed, revs, temperatures, engine load, boost and more, as far as the car reports them.
- Stored and pending fault codes of the engine and emission-related systems.
- Clearing those codes, always only after you confirm.
- The vehicle identification number (VIN), if the car reports it.
- The 12-volt battery voltage.
What it doesn't do
- Fault codes from modules such as ABS, airbags or body electronics: those are manufacturer-specific.
- Coding, programming, adaptations or service resets.
- Battery health of electric cars and hybrids.
- Keys, immobiliser or odometer.
Where is the OBD2 port?
Look for a 16-pin, trapezoid-shaped socket. Usually:
Under the dashboard on the driver's side, near the pedals or the steering column.
In right-hand-drive cars (UK, Ireland) the port is usually on the driver's side too, but some models keep it on the left.
Security gateway
Stellantis Secure Gateway (SGW)
from 2018 · Applies to: Europe (incl. UK), United StatesSince 2018, Fiat, Alfa Romeo, Jeep, Chrysler, Dodge, RAM and Maserati have a security gateway. Reading codes and live data still works. Clearing codes is usually blocked for ordinary plugs: garages need a registered tool (AutoAuth) for that.
Electric and hybrid
Hybrids have a combustion engine and therefore full standard OBD. Engine data comes through while the engine runs; battery data is manufacturer-specific.
Protocols per period
Typical for this make; it can differ per model. A good ELM327 plug supports all OBD protocols and picks the right one itself.
- ISO 15765 CANsince 2010 · standard OBD
Good to know
- RAM shares most of its electronics with Dodge, so what applies there largely applies here too.
- In the US, heavy pickups over 8,500 lb (3,856 kg), such as 2500/3500 models, came under the OBD rules later than cars. Older heavy pickups may not have standard OBD.
Tested in practice
What we and other drivers found with a real RAM. The rules above are a guideline; this is what actually happened.
No tests with a RAM yet
We haven't tested a RAM ourselves yet and fewer than 3 drivers have shared their results. Drive a RAM? Connect once and share anonymously whether it worked.
| Model and years | Status | What works | Dongle and protocol |
|---|---|---|---|
| All modelsfrom 2010 · Petrol · United States | ExpectedBased on the rules, not tested yet |
| – |
| All modelsfrom 2010 · Diesel · United States | ExpectedBased on the rules, not tested yet |
| – |
| All modelsfrom 2019 · Hybrid or plug-in hybrid · United States | ExpectedBased on the rules, not tested yet |
| – |
Verified: tested by us or a garage. Reported: at least 3 drivers shared the same result. Expected: follows from the rules, not tested yet.
Frequently asked questions
From which year does Car-Z work with a RAM?
With a standard OBD2 plug: petrol from 2010 in the US, diesel from 2010 in the US. Older cars usually lack standard OBD.
Where is the OBD2 port in a RAM?
Under the dashboard on the driver's side, near the pedals or the steering column.
Can I clear fault codes on my RAM?
Reading works. On newer models (from 2018) the security gateway usually blocks clearing for ordinary plugs; a garage with a registered tool can do it.
Does Car-Z work with an electric RAM?
As far as we know, RAM has no electric models. For hybrids, engine data comes through standard OBD.
Which plug do I need?
An ordinary, open OBD2 plug with Bluetooth LE that understands the standard ELM327 commands. Not a closed plug that only works with its maker's own app. The guides list which plugs we've tested and how to connect them.
Can Car-Z code or program my RAM?
No. Car-Z reads standard OBD: live data and engine fault codes. Coding, programming and service resets need manufacturer-specific tools.
Sources
- US EPA – OBD on 1996 and newer vehicles
- YOUCANIC – FCA Secure Gateway explained
- BITOG forum – clearing codes on 2018+ Stellantis
- Autel – Security gateways (North America)
- Ram Forum – secure gateway
How sure we are: Medium: based on reliable sources, with some details per model still uncertain.
Related makes
Ready to read your RAM?
Put a small plug in the port, open the app and connect.