Skip to content
SearchFree account
Menu
Dongle and car

Does it work with my car?

Car-Z reads the standard OBD2 data that every European petrol car since 2001 and diesel since 2004 has to provide. Brand-specific data is a different story.

3 min readUpdated 15 November 2026

The short answer

In the EU, (also called ) has been mandatory for new petrol cars since 2001 and for new diesel cars since 2004. In the United States it has been mandatory since 1996. If your car is from those years or later, Car-Z can almost certainly read the standard data.

Have a Dutch ? Enter it on the check page: your browser looks up the make, year and fuel at the , and Car-Z never receives the plate.

What you can read on (almost) every car

Some values, such as oil temperature, , fuel level and fuel rate, are optional. Whether you see them depends on your car. Values your car does not report simply show a dash.

  • , road speed, and .
  • and intake air temperature, and on many cars the outside temperature.
  • Stored and , with an explanation in plain language.
  • : which the car has completed.
  • The (), on most cars from around 2005.

What standard OBD2 does not give

Data such as the odometer reading, tyre pressures, gearbox temperature, soot level or the battery health of an electric car is brand-specific. Every manufacturer stores it in its own way, and it is not part of the standard. Car-Z does not promise these values. The odometer per is coming soon, read only: Car-Z never changes a mileage. Whether it can be read on your car depends on the make and has not been confirmed on a car yet.

  • Electric cars: standard often provides very little. Battery health (SoH) is not a standard value.
  • Hybrids: the petrol engine usually reports normally.
  • Trucks and heavy vans above 3.5 tonnes often use a different standard and are not supported.
  • Motorcycles (motorbikes) and mopeds have no like a car, so Car-Z does not work with them.

Your make page

On the compatibility page every make has its own page. Choose your make, model year and fuel, and you see the answer straight away. Per make you find:

  • From which year standard works, for petrol, diesel, hybrid and electric.
  • Where the is and which protocols the make uses.
  • : on many newer cars reading still works, but clearing codes is sometimes blocked for ordinary .
  • "Tested in practice": what we and other drivers found with a real car. "Verified" means tested by us or a garage, "Reported" means at least 3 drivers shared the same result, "Expected" means it follows from the rules but has not been tested yet.

Help other drivers

After you have read a real car for the first time, the app asks once per car whether you want to share anonymously whether Car-Z worked. You choose "Share", "Not now" or "Never ask again".

Before you share, you see exactly what is sent: the make and model year, the protocol, the , how many standard values the car reports, what worked and the app version. Your , location, account, trips, and IP address are not shared. A result only appears on the site once at least 3 people reported the same car.

Not sure?

Still in doubt after looking up your make? Buy your from a shop with a good return policy and try it on your car.

Was this guide helpful?

Your answer is only saved on this device.

Ready to read your car?

Plug in your dongle, switch on the ignition and open the app.

All guides