Why a dongle can drain the battery
The OBD port is connected directly to the car battery, so a dongle keeps getting power after you lock the car. A good dongle notices that the car is off and goes into a deep sleep in which it uses almost nothing.
With cheap dongles you often do not know whether they have a sleep mode. Such a dongle may keep drawing a small but constant current, and over time that can drain a battery. On some cars, a dongle that stays awake also keeps the car's electronics from going to sleep.
Choose a dongle with a sleep mode
Check what the maker says about a sleep mode. According to Vgate, the iCar Pro BLE 4.0 goes to sleep on its own 30 minutes after the engine is off (not in an electric car). According to OBDLink, the CX has a sleep mode and you can leave it plugged in. Veepeak does not mention a sleep mode for the OBDCheck BLE+ and advises unplugging it if the car is parked for more than a week.
Not sure about your dongle? Unplug it when you leave the car parked for a longer time.
Check that your dongle really sleeps
- Switch off the car, lock it and wait at least half an hour.
- Look at the light on the dongle. What the light does when the dongle sleeps is in its manual.
- Does the light stay on? Then unplug the dongle every time you park.
When to unplug it anyway
- When the car will be parked for more than a week.
- When the battery is old or weak, or the car has had starting problems.
- When you do not use Car-Z every day: plugging it in only takes a few seconds.
Was this guide helpful?
Your answer is only saved on this device.