Skip to content
SearchFree account
Menu
Chassis · Brakes and ABS

C0110ABS unit: pump motor circuit fault

Important

ABS and stability control are probably switched off. Your normal brakes still work, but wheels can lock in an emergency stop. Keep extra distance and have it checked soon.

What does it mean?

The unit contains a pump and valves that regulate the brake pressure per wheel when a wheel threatens to lock. The sees an electrical fault in this unit. Chassis codes are often used differently by each manufacturer, so have the exact meaning checked for your brand.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • , and lights on
  • Sometimes a buzzing pump that keeps running, or no pump test at start-up

Common causes

  • Blown fuse for the pump or valves
  • Corroded plug on the unit
  • Defective pump motor or (often repairable)
  • Low voltage from a weak battery

What you can check yourself

  • Check the fuses (see the owner's manual), often large fuses in the engine bay
  • Check whether the battery is in good condition

What to ask the garage

  • Is it the fuse, the pump motor or the ?
  • Can the be repaired instead of replaced?
  • Does the brake system need bleeding afterwards?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes