This can point to a stretched or jumped timing chain or belt. Don't drive far and have it checked soon: if the timing slips further, the engine can be seriously damaged.
What does it mean?
The crankshaft and camshaft are linked by a timing chain or belt and must always turn in step. The control unit compares their sensors and sees that they are out of step. Bank 2 is the side of the engine without cylinder 1. Only engines in V or boxer layout have it. Camshaft A is usually the intake camshaft.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Rough running or less power
- Hard starting
- Rattling sound from the front of the engine
Common causes
- Stretched timing chain or worn tensioner and guides
- Timing belt that has jumped a tooth
- Defective camshaft adjuster
- Faulty crankshaft or camshaft sensor
What you can check yourself
- Listen for rattling, especially just after a cold start
- Check the oil level: low oil pressure makes chain tensioners work poorly
What to ask the garage
- Was the timing checked mechanically, not just electronically?
- Is the timing chain stretched?
- Is it safe to keep driving until the repair?
Checked on 14 November 2026