Important
With too little fuel pressure the engine can lose power or stall while driving. If that happens, stop in a safe place.
What does it mean?
Modern engines inject fuel at high pressure from a common rail. The control unit measures that pressure and sees that it is too high compared with what it asked for. It often limits power to protect the engine.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Less power or emergency mode
- Hard starting or stalling
- Jerking under load
Common causes
- Blocked fuel filter (common on diesels)
- Weak fuel pump in the tank or a worn high-pressure pump
- Defective pressure regulator or pressure control valve
- Air or water in the fuel system
- Faulty rail pressure sensor
What you can check yourself
- Make sure there is enough fuel in the tank, especially on slopes
- Check when the fuel filter was last replaced
- Compare actual and requested rail pressure in the live data, if your car shows it
What to ask the garage
- Was the fuel filter replaced recently?
- Did you measure the low-pressure supply from the tank as well?
- Is the pressure sensor itself reliable?
Checked on 14 November 2026