Skip to content
SearchFree account
Menu
Powertrain · Air intake and turbo

P0109Intake pressure sensor (MAP): signal drops out now and then

What does it mean?

This sensor measures the pressure in the intake manifold. The uses it to work out how much air the engine gets and, with a , how much there is. The signal disappears or jumps for a moment. That usually points to a loose contact, a chafed wire or a plug with corrosion, often worse with vibration, heat or damp.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Less power, sometimes an emergency mode
  • Rough running or stalling
  • Higher fuel consumption

Common causes

  • Cracked or loose vacuum hose to the sensor
  • Sensor clogged with oil or soot
  • Damaged wiring or plug
  • Defective sensor

What you can check yourself

  • Check the small hose to the sensor (if there is one) for cracks
  • Check that the plug is firmly in place
  • Look for oil or soot around the sensor

What to ask the garage

  • Does the sensor show with the engine off?
  • Is the sensor clogged, or is the wiring at fault?
  • Did you check the intake for leaks?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes