Skip to content
SearchFree account
Menu
Powertrain · Air intake and turbo

P0112Intake air temperature sensor: signal too low

What does it mean?

This sensor measures how warm the intake air is. Cold air is denser, so the uses the temperature to fine-tune the mixture and ignition. The voltage is lower than a working part can deliver. Usually that points to a short circuit to ground, a broken supply wire or a defective part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Often hardly noticeable while driving
  • Sometimes harder starting or slightly higher consumption

Common causes

  • Loose or corroded plug
  • Damaged wiring
  • Defective sensor (often built into the sensor)

What you can check yourself

  • Check that the plug on the sensor or meter is firmly in place
  • With a cold engine, compare the intake temperature in the app with the outside temperature

What to ask the garage

  • Is the sensor separate or part of the sensor?
  • Does the live value make sense compared with the outside temperature?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes