Skip to content
SearchFree account
Menu
Powertrain · Cooling and oil

P0125Engine takes too long to warm up for mixture control

What does it mean?

After a cold start, the expects the engine to reach a certain temperature within a set time. It does not get there, or not in time. Usually the thermostat is stuck open, so the is cooled all the time.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Temperature gauge stays low or takes long to rise
  • Heater blows lukewarm air in winter
  • Higher fuel consumption

Common causes

  • Thermostat stuck open (the most common cause)
  • Faulty sensor
  • Low level
  • Cooling fan that keeps running

What you can check yourself

  • Watch the temperature gauge: does it reach its normal position after 10 to 15 minutes of driving?
  • Look at the in the app during a drive
  • Check the level when the engine is cold

What to ask the garage

  • Is the thermostat stuck open?
  • Is the temperature sensor reading correctly?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes