What does it mean?
Each cylinder has an injector that the control unit opens electrically for a fraction of a second. The control unit sees an electrical fault in the circuit of the injector for cylinder 2, so that cylinder may get too little or no fuel.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Engine runs on fewer cylinders: shaking and less power
- Misfire codes for the same cylinder
Common causes
- Loose or corroded plug on the injector
- Damaged wiring, for example chafed against the engine
- Defective injector coil
- Fault in the control unit's output stage (rare)
What you can check yourself
- Check that the plug on the injector is firmly in place
- Look for chafed or burnt wires along the injector harness
What to ask the garage
- Was the resistance of the injector measured?
- Is it the injector or the wiring?
- Does the injector need to be coded to the control unit after replacement?
Checked on 14 November 2026