What does it mean?
This sensor measures the pressure the turbo builds up. Without a reliable value, the control unit usually limits the turbo and engine power. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Less power or emergency mode
- Sometimes black smoke on a diesel
Common causes
- Sensor clogged with oil or soot
- Loose or corroded plug
- Damaged wiring
- Defective sensor
What you can check yourself
- Check that the plug on the sensor is firmly in place
- With the engine off, the boost pressure in the app should be about the same as outside air pressure
What to ask the garage
- Is the sensor itself defective, or the wiring?
- Was the sensor cleaned or replaced, and was the code cleared afterwards?
Checked on 14 November 2026