Skip to content
SearchFree account
Menu
Powertrain · Ignition and engine timing

P0304Misfire detected: cylinder 4

Important

Is the engine warning light flashing? Then there is a heavy misfire. Drive gently and stop as soon as it is safe: unburnt fuel can overheat and destroy the catalytic converter.

What does it mean?

The notices that combustion fails now and then in 4: the crankshaft briefly slows down when that should fire. Unburnt fuel then goes into the exhaust.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • Engine shakes or runs unevenly, especially at idle
  • Less power and hesitation
  • on or flashing
  • Fuel smell from the exhaust

Common causes

  • Worn or defective ignition coil (petrol)
  • Defective or leaking injector
  • Air leak in the intake
  • Low compression, for example from a valve or head gasket problem

What you can check yourself

  • Note whether the happens cold, warm, at idle or under load
  • Check whether other codes are stored, such as coil or injector codes for the same
  • If it is one : a garage often swaps the coil with another to see if the fault moves

What to ask the garage

  • Did the move after swapping the coil or plug?
  • Was a compression test done?
  • Is the still OK?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes