Skip to content
SearchFree account
Menu
Powertrain · Ignition and engine timing

P0333Knock sensor 2, bank 2: signal too high

What does it mean?

The knock sensor listens to the engine block for pinging: combustion that starts too early and can damage the engine. Without a working sensor, the retards the ignition to be safe, which costs power and fuel. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Somewhat less power and higher consumption
  • Sometimes a pinging or rattling sound under load

Common causes

  • Loose or corroded plug
  • Damaged wiring, often under the intake manifold
  • Defective sensor
  • Sensor not tightened to the correct torque

What you can check yourself

  • Avoid heavy loads at low until it is fixed
  • Use the fuel grade your car is meant for

What to ask the garage

  • Is the sensor or the wiring at fault?
  • How much work is it to reach the sensor on this engine?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes