Skip to content
SearchFree account
Menu
Powertrain · Electrical system and control unit

P0563System voltage too high

Important

With a voltage problem, the car may not restart, and electronics may behave strangely. Avoid switching off far from home until it is checked.

What does it mean?

The measures the voltage of the electrical system. With the engine running it should be about 13.5 to 14.8 volts, with the engine off about 12.4 to 12.7 volts. The measured voltage is too high.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • Battery or on
  • Hard starting
  • Flickering lights or strange electronics behaviour
  • Several other codes at the same time

Common causes

  • Weak or old battery
  • Defective or voltage regulator
  • Loose or corroded battery terminals or ground straps
  • Wrong charger or jump-start (voltage too high)

What you can check yourself

  • Look at the in the app with the engine off and running
  • Check that the battery terminals are tight and clean
  • Note whether the problem started after jump-starting or charging

What to ask the garage

  • Was the battery tested under load?
  • Is the charging correctly?
  • Are the ground connections in good condition?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes