What does it mean?
The engine control unit tests itself continuously. It has found a problem in its own memory, software or configuration. The control unit has found that it does not work as it should, without naming a more specific internal part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Sometimes no problems at all, sometimes stalling, emergency mode or no start
- Often after battery work, a software update or fitting a used control unit
Common causes
- Unstable power supply or poor ground, for example a weak battery
- Interrupted software update
- Control unit that was replaced and not (correctly) programmed
- Internal fault in the control unit (moisture, age)
What you can check yourself
- Note whether the code appeared after battery work or a repair
- Check that the battery terminals and ground straps are tight
- Clear the code once and see if it returns
What to ask the garage
- Is the power supply and ground of the control unit OK?
- Is a software update or reprogramming available?
- Can the control unit be repaired instead of replaced?
Checked on 14 November 2026