Skip to content
SearchFree account
Menu
Powertrain · Air intake and turbo

P2129Accelerator pedal sensor E: signal drops out now and then

Important

With a pedal sensor fault, the engine often limits power or only idles. Drive calmly to a safe place if it happens on the road.

What does it mean?

The has two sensors that measure how far you press it. The compares them to make sure the engine never gives power you did not ask for. The signal disappears or jumps for a moment. That usually points to a loose contact, a chafed wire or a plug with corrosion, often worse with vibration, heat or damp.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Engine in emergency mode or reacts little to the pedal
  • Sometimes only

Common causes

  • Worn pedal sensor
  • Loose or corroded plug at the pedal
  • Chafed wiring in the footwell
  • Water damage, for example from a leak or a wet floor mat

What you can check yourself

  • Check that no floor mat or object presses against the pedal
  • Look under the dashboard to see whether the plug on the pedal is firmly in place

What to ask the garage

  • Is the pedal unit defective, or the wiring?
  • Do both pedal sensors show matching values in the live data?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes