Skip to content
SearchFree account
Menu
Powertrain · Air intake and turbo

P2227Barometric pressure sensor: signal out of the expected range

What does it mean?

This sensor measures the , which changes with the weather and altitude. The uses it to adjust the mixture and . It is often built into the itself. Electrically the signal looks fine, but the value does not match what the expects from the other sensors. The part may be worn, dirty or slow, or there is a real problem in what it measures.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Often little difference while driving
  • Sometimes less power in the mountains

Common causes

  • Defective sensor, sometimes inside the
  • Loose plug or damaged wiring
  • A problem with the sensor supply voltage (often several codes together)

What you can check yourself

  • With the engine off, compare the value in the app with the air pressure from a weather app (about 1 bar or 100 kPa at sea level)
  • Check whether other sensor codes are stored too

What to ask the garage

  • Is the sensor separate or built into the ?
  • Are there other codes that point to a supply voltage problem?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes