Brake light on with the parking brake released, or a brake pedal that feels soft or goes down further than usual: stop as soon as it is safe and do not drive on.
What does it mean?
The red circle with an exclamation mark between brackets has several meanings depending on the car: the parking brake (handbrake) is on, the brake fluid is low, or the brake system has detected a fault. Some cars show a P in the circle for the parking brake and use the exclamation mark for the rest.
Low brake fluid can point to worn brake pads (the level drops slowly as they wear) or to a leak. A leak means the brakes can lose power.
If this light comes on together with the ABS light, the brake force distribution may not work. Have that checked straight away.
What can you do?
- Check that the parking brake is fully released.
- Is the light still on? Stop as soon as it is safe.
- With the engine off, check the brake fluid level in the reservoir against the MIN and MAX marks. Do not simply top up: a low level has a cause.
- Have the brakes checked before you drive further; call roadside assistance if needed.
What can Car-Z do with it?
Not readable over OBD2No. The brake fluid level and the parking brake are not part of standard OBD2. Car-Z cannot see why this light is on; a garage with brand-specific equipment can.
This page is an indication, not safety advice. Symbols, colours and the meaning differ per make and model: always check the owner's manual of your car. When in doubt, contact a garage or roadside assistance.
Content checked on 14 November 2026.