Skip to content
SearchFree account
Menu
Powertrain · Exhaust and emissions

P0153Oxygen sensor, bank 2, sensor 1: responds too slowly

What does it mean?

The () measures how much oxygen is left in the exhaust gas, so the can keep the mixture just right and the works well. Sensor 1 sits before the on bank 2: the side without 1. Only engines in V or boxer layout have a bank 2. The sensor still works, but switches too slowly between rich and lean. That is typical for an older or contaminated sensor, but an exhaust leak or a mixture problem can cause the same.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Higher fuel consumption
  • Sometimes uneven running
  • Often hardly noticeable while driving

Common causes

  • Worn or contaminated sensor (it is a wear part)
  • Exhaust leak just before the sensor
  • Damaged wiring, often near the hot exhaust
  • Loose or corroded plug

What you can check yourself

  • Listen for ticking or puffing from the exhaust near the engine: that points to an exhaust leak
  • Look at the values in the app: the sensor before the should switch quickly while driving

What to ask the garage

  • Is the sensor worn, or is something else wrong, such as an exhaust leak?
  • Was the heater of the sensor checked as well?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes