What does it mean?
The oxygen sensor (lambda sensor) measures how much oxygen is left in the exhaust gas, so the control unit can keep the mixture just right and the catalytic converter works well. Sensor 2 sits after the catalytic converter on bank 2: the side without cylinder 1. Only engines in V or boxer layout have a bank 2. The voltage is higher than a working part can deliver. Usually that points to a broken ground or signal wire, a loose plug, a short to a supply wire or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Higher fuel consumption
- Sometimes uneven running
- Often hardly noticeable while driving
Common causes
- Worn or contaminated sensor (it is a wear part)
- Exhaust leak just before the sensor
- Damaged wiring, often near the hot exhaust
- Loose or corroded plug
What you can check yourself
- Listen for ticking or puffing from the exhaust near the engine: that points to an exhaust leak
- Look at the oxygen sensor values in the app: the sensor before the catalytic converter should switch quickly while driving
What to ask the garage
- Is the sensor worn, or is something else wrong, such as an exhaust leak?
- Was the heater of the sensor checked as well?
Checked on 14 November 2026