What does it mean?
This sensor tells the control unit the position of the camshaft, so it knows which cylinder is on its power stroke. Camshaft A is usually the intake camshaft. Bank 1 is the side of the engine with cylinder 1. An in-line engine only has bank 1. Electrically the signal looks fine, but the value does not match what the control unit expects from the other sensors. The part may be worn, dirty or slow, or there is a real problem in what it measures.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Longer cranking before the engine starts
- Hesitation or less power
- Sometimes stalling
Common causes
- Defective sensor
- Loose or corroded plug, sometimes with oil in it
- Damaged wiring
- Camshaft timing that has shifted (stretched timing chain or belt)
What you can check yourself
- Check whether there is oil in the sensor plug
- Check whether camshaft timing codes are stored as well
What to ask the garage
- Is the sensor or the wiring at fault?
- Is the camshaft timing still correct?
Checked on 14 November 2026