Skip to content
SearchFree account
Menu
Powertrain · Ignition and engine timing

P0342Camshaft position sensor, camshaft A, bank 1: signal too low

What does it mean?

This sensor tells the the position of the camshaft, so it knows which is on its power stroke. Camshaft A is usually the intake camshaft. Bank 1 is the side of the engine with 1. An in-line engine only has bank 1. The voltage is lower than a working part can deliver. Usually that points to a short circuit to ground, a broken supply wire or a defective part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Longer cranking before the engine starts
  • Hesitation or less power
  • Sometimes stalling

Common causes

  • Defective sensor
  • Loose or corroded plug, sometimes with oil in it
  • Damaged wiring
  • Camshaft timing that has shifted (stretched timing chain or belt)

What you can check yourself

  • Check whether there is oil in the sensor plug
  • Check whether camshaft timing codes are stored as well

What to ask the garage

  • Is the sensor or the wiring at fault?
  • Is the camshaft timing still correct?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes