Skip to content
SearchFree account
Menu
Powertrain · Cooling and oil

P0522Oil pressure sensor: signal too low

Important

If the oil pressure light comes on while driving, stop immediately and switch off the engine. Without oil pressure, the engine can be destroyed within minutes.

What does it mean?

This sensor or switch watches the oil pressure that lubricates the engine. The sees a problem with the signal, so it cannot reliably warn you about low oil pressure. The voltage is lower than a working part can deliver. Usually that points to a short circuit to ground, a broken supply wire or a defective part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • on
  • Oil pressure light flickers or stays on, or never comes on
  • Oil pressure display wrong

Common causes

  • Defective sensor or switch
  • Oil leak at the sensor
  • Loose or corroded plug
  • Damaged wiring

What you can check yourself

  • Check the oil level right away
  • Look for an oil leak around the sensor

What to ask the garage

  • Was the oil pressure measured mechanically to rule out a real problem?
  • Is the sensor or the wiring at fault?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes