What does it mean?
Temperature sensors in the exhaust protect the turbo and catalytic converters from overheating and control the particulate filter regeneration. Sensor 1 is the first temperature sensor in the exhaust, usually close to the engine or just before the turbo. The control unit sees an electrical fault in this circuit. Most often that is a broken wire, a corroded or loose plug, or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light on
- Particulate filter regeneration does not work properly
- Sometimes less power to protect the engine
Common causes
- Defective sensor (they suffer from the heat)
- Damaged wiring or a melted plug
- Corroded plug from road salt
What you can check yourself
- With a cold engine, compare the exhaust temperature in the app (if available) with the outside temperature
- Look for melted or chafed wires along the exhaust (only when it is cold)
What to ask the garage
- Is it the sensor or the wiring?
- Can the sensor be removed without damaging the thread in the exhaust?
Checked on 14 November 2026