Skip to content
SearchFree account
Menu
Powertrain · Diesel, particulate filter and AdBlue

P2454Particulate filter pressure sensor: signal too low

What does it mean?

This sensor measures the pressure before and after the , so the knows how full the filter is and when to clean it. Without a reliable value, regeneration does not work properly. The voltage is lower than a working part can deliver. Usually that points to a short circuit to ground, a broken supply wire or a defective part.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • or light on
  • Regeneration happens too often or not at all
  • Sometimes emergency mode

Common causes

  • Loose, cracked or melted pressure hoses
  • Hoses mixed up after a repair
  • Defective sensor
  • Loose plug or damaged wiring

What you can check yourself

  • Look at the small hoses from the filter to the sensor: are they firmly in place and undamaged?
  • With the engine off, the measured pressure difference in the app should be close to zero

What to ask the garage

  • Are the hoses connected the right way round?
  • Is the sensor itself defective?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes