What does it mean?
During a regeneration, the engine raises the exhaust temperature to burn off the soot in the particulate filter. The control unit sees that this process happens too often.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Particulate filter light or engine warning light on
- Higher fuel consumption
- Idle speed higher than usual, cooling fan running after switching off
- Hot smell from the exhaust
Common causes
- Many short trips that keep interrupting the regeneration
- Engine problems that produce extra soot
- Faulty exhaust temperature or pressure sensor
- Too much oil in the engine, sometimes from fuel getting into the oil during regenerations
What you can check yourself
- Check the oil level: a level that rises above the maximum mark points to fuel in the oil
- Plan a longer drive at a steady speed now and then, if the car is not in emergency mode
What to ask the garage
- Why is regeneration not completing properly?
- Is there fuel in the engine oil, and should the oil be changed?
Checked on 14 November 2026