Skip to content
SearchFree account
Menu
Network · Vehicle network

U0104Lost communication with the cruise control module

What does it mean?

The in your car exchange data over a network (the ). Another can no longer reach the cruise . It keeps the speed you set. The cause can be that unit itself, its power supply or the network wiring.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • Warning lights of the system concerned
  • Functions of that system do not work or work only partly
  • Often several network codes at the same time
  • Sometimes only once, after a flat battery or jump-start

Common causes

  • Flat battery, low voltage or a blown fuse for that unit
  • Corroded plug or water damage
  • Damaged network wiring
  • Defective

What you can check yourself

  • Check whether the battery is in good condition and the terminals are tight
  • Note whether the code appeared after a flat battery, jump-start or repair
  • Check whether the functions of this system work

What to ask the garage

  • Does the unit get power and ground?
  • Can the unit be reached with a diagnostic tool?
  • Is it the unit or the network wiring?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes