What does it mean?
The control units in your car exchange data over a network (the CAN bus). Another control unit can no longer reach the glow plug control unit. It heats the glow plugs of a diesel engine for cold starts. The cause can be that unit itself, its power supply or the network wiring.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Warning lights of the system concerned
- Functions of that system do not work or work only partly
- Often several network codes at the same time
- Sometimes only once, after a flat battery or jump-start
Common causes
- Flat battery, low voltage or a blown fuse for that unit
- Corroded plug or water damage
- Damaged network wiring
- Defective control unit
What you can check yourself
- Check whether the battery is in good condition and the terminals are tight
- Note whether the code appeared after a flat battery, jump-start or repair
- Check whether the functions of this system work
What to ask the garage
- Does the unit get power and ground?
- Can the unit be reached with a diagnostic tool?
- Is it the unit or the network wiring?
Checked on 14 November 2026