Without a working NOx sensor, many cars start a countdown to a start block. Have it checked in good time.
What does it mean?
The NOx sensor measures nitrogen oxides in the exhaust gas, so the control unit can dose AdBlue and check the SCR catalytic converter. It has its own small control unit, often on the same cable. Bank 1 is the side of the engine with cylinder 1. An in-line engine only has bank 1. The control unit sees an electrical fault in this circuit. Most often that is a broken wire, a corroded or loose plug, or a defective part.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Engine warning light or AdBlue warning
- Countdown on the display
- Usually no difference in driving
Common causes
- Defective NOx sensor (a known wear part on many diesels)
- Corroded plug or damaged wiring near the exhaust
- Soot or AdBlue deposits on the sensor
What you can check yourself
- Write down any countdown on the display
- Look for damaged wiring along the exhaust (only when it is cold)
What to ask the garage
- Is it the sensor or the wiring?
- Does the new sensor need to be taught in?
Checked on 14 November 2026