What does it mean?
Messages from the transmission control unit do arrive, but their content is not plausible: a value is out of range, a checksum is wrong or the message counter does not add up. It decides when an automatic gearbox shifts.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Warning lights of the system concerned
- Functions that work partly or switch off
- Often after replacing or reprogramming a control unit
Common causes
- Control unit with wrong or outdated software or configuration
- A sensor of that unit that gives wrong values
- Network disturbance or poor power supply
- Defective control unit
What you can check yourself
- Note whether the code appeared after a repair or replacement of a control unit
- Check whether there are other codes in the sending unit itself
What to ask the garage
- Does the sending unit have the correct software and configuration?
- Are there codes in that unit that explain the bad data?
Checked on 14 November 2026