What does it mean?
Messages from the ABS control unit do arrive, but their content is not plausible: a value is out of range, a checksum is wrong or the message counter does not add up. It prevents the wheels from locking when braking and often also runs traction and stability control.
This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.
What you may notice
- Warning lights of the system concerned
- Functions that work partly or switch off
- Often after replacing or reprogramming a control unit
Common causes
- Control unit with wrong or outdated software or configuration
- A sensor of that unit that gives wrong values
- Network disturbance or poor power supply
- Defective control unit
What you can check yourself
- Note whether the code appeared after a repair or replacement of a control unit
- Check whether there are other codes in the sending unit itself
What to ask the garage
- Does the sending unit have the correct software and configuration?
- Are there codes in that unit that explain the bad data?
Checked on 14 November 2026