Skip to content
SearchFree account
Menu
Network · Vehicle network

U0422Invalid data received from the body control module

What does it mean?

Messages from the body do arrive, but their content is not plausible: a value is out of range, a checksum is wrong or the message counter does not add up. It controls lights, locks, wipers and other comfort functions.

This is the general meaning of the code. Manufacturers sometimes use a code in their own way, so your garage may give a more specific explanation for your car.

What you may notice

  • Warning lights of the system concerned
  • Functions that work partly or switch off
  • Often after replacing or reprogramming a

Common causes

  • with wrong or outdated software or configuration
  • A sensor of that unit that gives wrong values
  • Network disturbance or poor power supply
  • Defective

What you can check yourself

  • Note whether the code appeared after a repair or replacement of a
  • Check whether there are other codes in the sending unit itself

What to ask the garage

  • Does the sending unit have the correct software and configuration?
  • Are there codes in that unit that explain the bad data?

Checked on 14 November 2026

Read the codes of your own car

Put a small plug into your car and open Car-Z. You will see all stored codes with this explanation, plus live data.

All fault codes